Printmaker U-Gouge

$65.00
Size

Description

This U-gouge is made with a laminated HSS edge backed by softer steel. This gives it great edge retention and enables it to be forged in very small cross-sections. We are not aware of any other manufacturer laminating these materials in carving tools, and continue to love working with these great edges.

It is perfect for adding detail on woodblock prints and 3D objects. As it is so fine, it needs to be used with care and attention to avoid bending, fatiguing or even breaking the tool. Cut only along the axis of the tool, with forward (not downward) pressure. The same advice hold true for any carving tool under 3mm.

This gouge's handle can have it's brass ferrule removed to pivot open, revealing the shaft of the cutter. This can be used to adjust the length of the tool that protrudes from the handle, or reveal more in the case of wear or breakage. In both instances a few extra tools are required to make these modifications.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David Wilson
Printmaker U-Gouge

Comfortable to use and sits well in the hand without getting tired. I was gouging very hard Indian Rosewood and it struggled a bit to remove much at a time but although the cuts took longer to get to the required depth it was worth the extra effort.

Printmaker U-Gouge - Gouges - Japanese Tools Australia
Michihamono

Printmaker U-Gouge

$65.00

This U-gouge is made with a laminated HSS edge backed by softer steel. This gives it great edge retention and enables it to be forged in very small cross-sections. We are not aware of any other manufacturer laminating these materials in carving tools, and continue to love working with these great edges.

It is perfect for adding detail on woodblock prints and 3D objects. As it is so fine, it needs to be used with care and attention to avoid bending, fatiguing or even breaking the tool. Cut only along the axis of the tool, with forward (not downward) pressure. The same advice hold true for any carving tool under 3mm.

This gouge's handle can have it's brass ferrule removed to pivot open, revealing the shaft of the cutter. This can be used to adjust the length of the tool that protrudes from the handle, or reveal more in the case of wear or breakage. In both instances a few extra tools are required to make these modifications.

Size

  • 1.5mm
  • 1mm
  • 3mm
  • 4.5mm
  • 6mm
View product