Shinwa circular saw guides
Straight, square cuts with any circular saw.
Shinwa guides turn a handheld circular saw into a precision tool: dead-square cross-cuts, rips to an exact width, any angle and full-sheet cuts. Pick the cut you want to make and we'll show you the right guide.
- Designed by Shinwa, Japan
- Same-day dispatch before 12pm
- 14-day returns
Step 1
What are you cutting?
- Square cross-cuts Dock timber to length with a dead-square cut. See guides ↓
- Rip cuts and parallel strips Rip boards and sheets to an exact width. See guides ↓
- Any angle Set any angle for framing, trim and joinery. See guides ↓
- Sheets and long cross-cuts Cross-cut panels and wide boards in one pass. See guides ↓
L-Angle Fit
Square cross-cuts
A high fence hooks tightly over the edge of the timber, so you can hold the guide in one hand while the saw runs along it. Comes in three sizes for two-by-fours, floorboards and all kinds of small stock.
T-Slide
Rip cuts and parallel strips
A fence slides along a scaled arm and locks at your width, so the saw tracks dead straight down the length of the board, like a track saw without the track. Stabilisers stop the arm flexing mid-cut.
Free Angle
Any angle
Swing the arm to the angle you need and lock it. Ideal for scribing angles off existing work and making angled cuts in timber without resetting a square every time.
Foldable L-Angle Next
Sheets and long cross-cuts
A long L-angle guide for cross-cutting plywood, panels and wide boards. Fix it at 90° or set anywhere from 75° to 135°, then fold the fence away for transport.
Add-ons
Accessories
A slider runs in the dedicated groove on compatible Shinwa guides, holding the saw base against the guide so it can't drift off line.
At a glance
Every guide, side by side
| Guide | Cut | Best for | Size / angle | Price |
|---|---|---|---|---|
| L-Angle Fit 30cm | Square cross-cuts | Wider boards, decking and sheet edges | 90° · 300mm | $89 |
| L-Angle Fit 23cm | Square cross-cuts | Two-by-fours and floorboards | 90° · 230mm | $74 |
| L-Angle Fit 15cm | Square cross-cuts | Small stock, fits in an apron pocket | 90° · 150mm | $52 |
| Triangle 15cm (45° / 90°) | Square cross-cuts | Tool-bag square for 45° and 90° cuts | 45° / 90° · 238mm · 275g | $54 |
| T-Slide II 45cm | Rip cuts and parallel strips | Ripping boards and sheets to width | Up to 45cm · Movable stop | Sold out |
| T-Slide II 30cm | Rip cuts and parallel strips | Narrow rips, strips and trims | Up to 30cm · Movable stop | $55 |
| T-Slide Double 60cm | Rip cuts and parallel strips | Repeat strips: two fences, set independently | Up to 60cm · Double fence | $110 |
| Foldable T-Slide Slim Shift 60cm | Rip cuts and parallel strips | Wide rips that fold away to 89mm | Up to 60cm · Folds flat | Sold out |
| Foldable T-Slide Slim Shift 45cm | Rip cuts and parallel strips | Rips on site, folds into the tool bag | Up to 45cm · Folds flat | $98 |
| Free Angle Neo 45cm | Any angle | Compound framing and odd-degree trims | 15°–165° · 5° steps · 450mm | $110 |
| Mini Free Angle Quick Adjust 30cm | Any angle | Quick angles, locks at 45°, 90° and 135° | 20°–160° · Folds · 300mm | $69 |
| Foldable L-Angle Next 1m | Sheets and long cross-cuts | Full-width panel cross-cuts | 90° or 75°–135° · 1m | Sold out |
| Foldable L-Angle Next 60cm | Sheets and long cross-cuts | Wide boards and half sheets | 90° or 75°–135° · 60cm | Sold out |
| Foldable L-Angle Next 45cm | Sheets and long cross-cuts | Shelving, boards and offcuts | 90° or 75°–135° · 45cm | $159 |
| Slider for Circular Saw Guides | Accessories | Stops the saw drifting on grooved guides | Made in Japan | $29 |
Questions
Will they fit my saw?
Yes, for almost every handheld circular saw, corded or cordless. The L-Angle, Triangle, Free Angle and Next guides work with any saw: the saw's base plate simply runs along the guide edge. The T-Slide guides have a 12mm × 3mm blade slot that suits most circular saws.
Which guide should I start with?
For most workshops, an L-Angle Fit (23cm or 30cm) for square docking cuts plus a T-Slide II 45cm for rips covers the majority of jobs. Add a Free Angle if you cut a lot of angles, or a Foldable L-Angle Next for sheet goods.
What is the difference between the T-Slide II and the Foldable Slim Shift?
Both rip to a set width. The T-Slide II has a rigid fence with stabilisers for the steadiest cut; the Foldable Slim Shift folds down to 89mm wide, so it is easier to carry to site.
Do I need the slider?
No, but it helps. On guides with a slider groove, the slider holds the saw base against the guide so it can't wander, which makes long cuts more repeatable.
Shipping and returns
Orders placed before 12pm are dispatched the same day from Sydney, and shipping is free over $200. If you're not happy, you can return it within 14 days.
Not sure which guide suits your saw?
Call us on 02 9527 3870 or visit the Sydney showroom and try them in person.
















