Furniture and cabinets
Hide screws under plugs cut from the same board, so joins look like solid timber.
“These are so clean on hard and soft wood. They work with ease, I highly recommend them.”Kate O.
The Star-M High Speed Steel Countersink and Plug Cutter Set contains a countersink and a plug cutter made from high speed steel.
Long lasting, accurate and fast, it drills, countersinks and counterbores in one step, and can be used in a hand-held drill.
Available in two sizes. Choose your option above.
STAR-M Countersink and Plug Cutter Set
One bit drills the pilot hole, countersink and counterbore in a single pass. The matching plug cutter turns an offcut into a plug that fits that hole exactly, so the screw disappears under timber. Made in Japan by STAR-M.
4.92 / 5
from 12 verified reviews
740+
countersink sets sold by JTA in the last 12 months
Made in Japan
by STAR-M, drill makers for over 100 years
Before 12pm
orders ship the same day from Sydney
How it works
Two bits made as a matched pair. Here's the whole job, start to finish.
Drill the pilot hole
The tapered drill tip bores the hole for the screw thread.
Countersink and counterbore
Keep drilling and the cutter behind the tip chamfers the hole and bores a clean recess for the screw head, in the same pass.
Set the depth
The included Allen key adjusts the drill tip, so you can choose how deep the screw head sits.
Drive the screw
The head drops neatly into the counterbore, below the surface.
Cut a matching plug
Use the plug cutter in an offcut of the same timber. It cuts a plug the same size as the hole.
Glue, tap in and trim
Line up the grain, glue the plug in and trim it flush. The screw is gone.
Where you'll use it
Hide screws under plugs cut from the same board, so joins look like solid timber.
“These are so clean on hard and soft wood. They work with ease, I highly recommend them.”Kate O.
The drill and plug cutter are made as a pair, so the plug matches the hole every time. No hunting for a drill to suit your plug cutter.
“The Star M plug set which I purchased for a specific job did not disappoint, the plug fit was perfect, so clean!”Mark H.
Clean, accurate holes with crisp edges, ready for a plug that disappears.
“Surprised at how clean both peices cut. Wonderful quality.”reuben
Sink screw heads below the surface and plug over them for a smoother, cleaner finish.
Cut plugs from a contrasting timber and make the fixings part of the design.
Counterbore over old or misplaced screw holes and plug them with timber instead of filler.
Why buy it from JTA
Countersinks are easy to find. Ones that cut this cleanly, with a plug that fits first time, are not.
Made in Japan by STAR-M
Precision drill makers from Miki City, Japan, for over 100 years.
Choose your steel
Carbon steel for great value, or high speed steel for hardwoods and heavy use. Both cut clean plugs.
In stock in Sydney
Order before 12pm and we ship it the same day from Sydney.
14-day no-questions returns
If it isn't right for you, send it back within 14 days.
Real people who use it
Not sure which size or steel? Call us on 02 9527 3870 or visit the showroom.
Pair it with STAR-M drill bits
Build your own set of STAR-M Super Clean Cut bits on our STAR-M page.
Rated 4.92 / 5 by 12 woodworkers
★★★★★
Excellent
“I’ve been looking for an accurate, clean plug cutter and countersink set for a while. I actually started to think my old clunker of a drill press was the problem, turns out it was just my drill bits! These are so clean on hard and soft wood.”
★★★★★
plug cutters
“After trying the 9mm set I immediately ordered the 10mm(I would have taken any other sizes if I could!)”
★★★★★
Star M
“I discovered Star M drill bits in Japan some time ago. They give the cleanest cut out of all the drill bits I have used in the past, simply beautiful to use.”
★★★★★
Star M High Speed Steel Countersink and Plug Cutter
“Very happy with the Star M high speed steel countersink and plug cutter a nice clean cut with the countersink and the plug cutter.”
★★★★★
Excellent Star-M Quaity
“As expected this set is beautifully manufactured and cuts near perfect countersinks and plugs cleanly and quickly.”
★★★★★
very happy customer
“Surprised at how clean both peices cut. Wonderful quality.”
Choose your set

From $44.00

From $39.00
View Carbon steel setThe first number is the pilot drill and the second is the counterbore and plug diameter, so your screw head needs to fit inside the second number. As a rough guide, 3mm/9mm suits smaller screws around 4mm (8 gauge), and 4mm/10.5mm or 4mm/12mm suits larger screws around 5mm (10 gauge). Not sure? Call us on 02 9527 3870.
Both cut clean countersinks and snug plugs. Carbon steel is great value and ideal for softwoods and occasional use. High speed steel resists heat and wear, so it stays sharp longer in hardwoods and with regular use.
Both bits have a hex shank for drill chucks and quick-change holders. One reviewer found the hex a little long to lock into his Makita driver's collar, so it's worth checking if you use that type of holder.
A moderate speed gives the cleanest cut. We recommend no more than 3,000 rpm, and letting the cutter do the work.
Drill into the face of an offcut to the depth you need, then lever the plugs out with a small screwdriver or slice them free on a bandsaw. Cut plugs from the same board, and line up the grain, for a near-invisible finish.
The countersink drill and the matching plug cutter, plus an Allen key for adjusting the drill tip.
Order before 12pm and it ships today from Sydney.